2221 Yew Street
Forest Grove, Oregon 97116 USA
(503) 357-5607 or (800) 382-3765
Fax (503) 357-0491

INDUSTRIAL LAN | WIRING COMPONENTS AND TESTERS

Fieldbus Terminators

Terminators

Isolated Terminator with Screw Terminals

The Isolated Terminating Block, FCS-TI, is used as a terminator and wiring block at the far end of the segment. The terminating block interconnects up to four shielded twisted-pairs; for example, the home run cable and three devices. A high energy surge suppressor built into the isolated Terminator protects the devices attached to the Fieldbus from near lightning strikes. A stainless steel ground stud is used for earthing the surge currents induced into the shields of the Fieldbus wiring. When not discharging surges, the ground stud is DC isolated from the cable shields.

These Terminators are part of our Legacy Fieldbus interconnection blocks. For new designs, we recommend our Megablock Series.


Free Download - Adobe Acrobat Reader

The DXF links in the Drawings column below are mechanical drawings of the product that may be included in your AutoCAD® or equivalent CAD drawings. The remaining table entries are PDF files that may be viewed with
Adobe’s Acrobat Reader.

Part Number Description Data Sheet Installation Instructions Drawing (DXF) Certification Applications
FCS-TI-PL Isolated Terminator, Pluggable Screw Terminals PS-006

500-274

502-123

FCS-TI-PL.DXF



CC-001

CC-026

General Purpose

Class I, Division 1, Groups A, B, C and D

Class I, Zone 0, Groups IIC, IIB, IIA

Class I, Division 2, Groups A, B, C and D

Ex nA IIC T4

AEx nA IIC T4

FCS-TI-ST Isolated Terminator, Fixed Screw Terminals FCS-TI-ST.DXF
FCS-TI-CC Isolated Terminator, Cage Clamp Terminals FCS-TI-CC.DXF